DVN & Enmore Hangzhou EAC Lidar, ADAS and Interior Tech Expo – June 04-06, 2025

Theme: Driving Automotive Future by Tech Innovation
Location: Hangzhou Grand Convention & Exhibition Center

Enmore Automotive Conference and Exposition aims to establish the most professional, focused, and forward-looking platform for automotive pre-installation market exchanges and connections in the Asia-Pacific region. Initiated in 2022, EAC brings together core technologies, products, and companies from the upstream and downstream of three major sectors: new energy and thermal management, interior, exterior and cockpit, as well as intelligent driving and vehicle optics. It facilitates the sharing of cutting-edge, innovative, and commercially valuable R&D technologies and application cases from around the world, helping industry professionals capture future trends, link upstream and downstream resources, and drive industry development.

Optics and LiDAR Exhibition Area covers: LiDAR Modules, Lasers, Detectors, Scanning Components, Amplifiers, ADC, DAC, Main Control Chips, Filter, Collimating Lens and other Precision Optical Components, Silicon Photonic Device, Simulation Test, Assembly Patch Equipment, Packaging Technology, Heat Dissipation Materials, Adhesive Materials.

Interior Exhibition Area covers: Cockpit, Seats, Design, Materials; that includes Seats and Seating Components, Displays, Intelligent Cockpits, Cockpit Software Platform, Intelligent Surfaces, Interior Decoration, Interior Design, CMF- Color Material Finish, Interior Lighting, Acoustics and NVH, Audio Systems, Overhead Systems, Door Trim, Interior Trim, Carpets, Steering Wheels.

EAC Website

For more information, please contact:
Eric Amiot – Sensing & Applications General Editor: eamiot@drivingvisionnews
Philippe Aumont: Interior General Editor: [email protected]
Anne Ai – China Manager: [email protected]
Emilie Ogor Bonnet – Marketing & Communication Director:
[email protected]
Christophe Lameiras – Back Office Manager :
[email protected]

EAC Lidar & ADAS

ADAS Content
– Lidar, Radar, Camera, Domain Controller
– 50+ speakers, 100+ Exhibitors for Radar/Camera

Visitors: 7000 Attendees for ADAS, 1500 for Lidar Tech
Contributors:
– 50+ speakers, 100+ Exhibitors for Lidar Tech
– 50+ speakers, 100+ Exhibitors for Radar/Camera

HALL-8 Intelligent Driving & In-Veh. Optics Pavillon

AD/ADAS System Integration
Lidar / Radar / Camera
Optical Communication
Transmitters, Beam Control, Precision Optical Components
AR-HUD / IMS
High Precision Positioning
Domain Controllers
Wire-Controlled Chassis
Automated Production & Testing Lines
Data Services & Simulation Testing

Schedule – Lidar Tech

PROGRAM

June 4th – Main Forum 1: Mass Production and Its Application

1. Market Prospects, Challenges, Application Trends and Key Technologies of Lidar Manufacturers and Suppliers
2. How OT128 Empowers Safer and Smarter Autonomous Driving Functions
3. Promoting the Mass Production of Thousand yuan Lidar through Technological Innovation
4. Layout of Dual Technology Routes to Achieve a New Growth Engine
5. Breakthroughs in Lidar Core Technologies
6. 256 line Vehicle level Lidar for Autonomous Driving Applications
7. Achieving the Ultimate Performance and Optimal Cost of Lidar through Technological Innovation
8. High Sensitivity Technology Helps to Reduce the Size and Price of Lidar
9. Vehicle level Pure Solid state Flash Lidar Empowering Autonomous Driving
10. Pure Solid state Side Blind Spot Lidar, Safeguarding Future Intelligent Travel
11. Building 4C Standard Lidar, Embracing the Era of Intelligent Perception Increment
12. Views and Thoughts of Automotive OEMs on Key LIDAR Performance Specifications

June 4th – Main Forum 2: New Technology: Silicon Photonics Technology and FMCW

1. Developing Long distance FMCW Automotive Lidar Using Integrated Photonics
2. LARK Leading the New Height of FMCW Lidar Productization
3. Silicon Photonic Integrated Circuits for FMCW Lidar for Automotive Applications
4.. Solid state FMCW Lidar Based on Optical Phased Array
5. Silicon Photonic FMCW Lidar Technology and Its Commercialization Path
6. Latest Developments and Applications of Silicon based All solid state Lidar
7. Photonic Integration of Lidar Based on Modular Solid state FMCW
8. Achieving Large scale Market Adoption of FMCW LiDAR through Silicon Photonic
9. Chip Integration Silicon Photonic Integrated Chip and High end Photon Sensing Technology
10. SiN Photonic Integrated Circuits for Compact Lidar Applications
11. Silicon Photonics Platform Facilitating the Development of FMCW Lidar System
12. Lidwave’s Disruptive Finite Coherent Ranging (FCR ™) Patented Technology

June 5th – Forum 1: Laser & Detector

Laser Session
1. On chip Lasers and Their Silicon based Optoelectronic Chips for Lidar Applications
2. All solid state VCSEL Chips for Vehicle mounted Lidar
3. New Generation Low Temperature Drift 905nm EEL Chips for Lidar Applications
4. Linear Frequency modulated Narrow Linewidth Lasers for FMCW Lidar
5. VCSEL Technology Facilitating the Development of High performance Lidar
6. Small Divergence Angle AR VCSEL, Driving the Transformation of Automotive Lidar

Detector Session
1. Hamamatsu’s Thoughts on Lidar Core Transceiver Devices
2. Single Photon Detection Technology for Vehicle mounted Laser Applications
3. SPAD Chips and Integrated Image Signal Processor Technology Suitable for Lidar SPAD Array for Lidar
4. SPAD Chips Based on 3D Stacking Technology, Empowering Advanced Lidar Systems
5. Latest Thoughts on Lidar SPAD Chips

June 5th – Forum 2: Beam Contro l & Materials & Precision Optical Components

1. Low cost Miniaturized MEMS Products for High performance Lidar
2. Photonic Integrated Circuits with Multiple Waveguide Layers for Broadband and Efficient 3D Optical Phased Array
3. Optical Metasurface Providing a Highly Flexible Optical Implementation Means for Lidar Optical Systems
4. Developing Smaller and Lower priced Lidar Using Acousto optic Beam Control
5. Nanoengineered Materials of Metasurface , Offering New Ideas for Lidar Development
6. 3D Lidar System Based on Optically ControlledMetasurface
7. Silicone Materials for Lidar and Automotive Sensors
8. Improving Lidar Using Precision Refraction and Diffraction Micro optical Components
9. Cooling Optical Components (TEC) Facilitating the Improvement of Lidar Performance
10. Adhesive Materials for Lidar
11. Research and Development and Application of Key Precision Optical Components for Lidar
12. New Methods for the Commercialization of Metalens Technology, Suitable for Autonomous Driving Lidar

Exhibitors Intelligent Driving & In-Vehicle Optics

EAC Interior

Download the program

DVN has partnered with EAC Enmore Automotive to leverage its expertise and network with a leading Chinese technology exhibition organization to help DVN members to expand their business in China.

EAC2025 Interior, Exterior, and Cockpit Exhibition, carefully crafted by Enmore Automotive, has accumulated 12 years of experience and expertise in the interior, exterior, and cockpit segment. Organizing over 100 specialized events in this field, the exhibition starts from vehicle design language and presents a full closed-loop supply chain of automotive interior and exterior components. It covers areas such as vehicle design, intelligent cockpit & interior/exterior trim, CMF design, smart surfaces & interior lighting, interior surfaces, seats, safety systems, NVH, automotive audio, and in-vehicle innovative displays. The exhibition brings together every key link of the global interior, exterior, and cockpit industry chain, from technological R&D to product manufacturing, from supply chain management to market expansion.

The EAC Enmore Conference & Exhibition Halls are organized per zone:

1. Complete Vehicle and Assembly Zone
OEMs with cutting-edge automotive design aesthetics, drawing a new blueprint for the application of future parts, and leading the automotive industry to a new journey of innovation.

2. CMF Design Zone
All materials, interior surface materials from textile, leather, suede, to decoration, aluminum, wood, brush, just to name a few, CMF color solutions, color management, etc

3.Seat and Interior
Seats, and all seating components
Interior with Door systems, sunroof systems, injection-molded/blow-molded parts, door panels, dashboards, headliners, carpets, etc.

4. Audio and NVH Zone
Audio Effects: Real-vehicle sound effect demonstration, in-car audio system, algorithm module, audio chips, acoustic materials, dampers, etc.

5. Innovative Display Zone
Display, screens, LCD, LED, backlighting, OLED, etc.

6. Process and Production Line Exhibition Zone
Sewing, cutting, punching, embossing, printing, laser engraving equipment, production line equipment, visual inspection, defect detection, dispensing machines, etc.

Forums & Conferences

For complete conference program, see below or download the PDF
page 7-23

Exhibition

Standard Booths: 6m2, 9m2, 12m2 & 24 m2 (48m2, 96m2 also available on request)

DVN & Enmore Hangzhou EAC Lidar, ADAS and Interior Tech Expo – June 04-06, 2025

EAC Lidar & ADAS

EAC Interior

Exhibition

Not a DVN member?

Receive DVN newsletter headlines for free now!